Advantage Gripware Apple Boxes are made in our own
Manufacturing facility in Roanoke, Alabama from imported Birch
plywood. Sides are 3/4” ply, and tops and bottoms are made
with 1/2” ply plywood. All boxes have a plywood center support.
Boxes are glued and nailed
We highly recommend that all Apple Boxes be treated with a
wood sealer to minimize warping.
Due to EPA regulations, it would not be cost effective
for us to do this at the factory.
Telephone: (334) 863-4488
e-mail: sales@advantagegrip.com
WOOD PRODUCTS
APPLE BOXES
“SET in ONE” APPLE BOX SET
“Set in One” is a unique design which saves a tremendous amount
of space on the equipment vehicle, by storing the Half, Quarter
and Eighth boxes inside the Full. The front lid of the Full Apple
Box is held in place by two steel registration pins and two “rare
earth” magnets. There is only one carry hold for safety reasons.
Advantage Gripware Apple Boxes are made in our own
manufacturing facility in Roanoke, Alabama from imported Birch
plywood. Sides are 3/4” thick, and tops and bottoms are made
with 1/2” thick plywood. Boxes are glued and nailed, with the
corners of the outer box screwed.
We highly recommend that all Apple Boxes be treated with a
wood sealer to minimize warping. Due to EPA regulations, it
would not be cost effective for us to do this at the factory.
TRACK WEDGES
“Track Wedges are cut from Premium 2x4 lumber. We offer them
by the piece, in a Milk Crate, containing 70 Wedges and in a
Carton, containing 100.
CAMERA WEDGES
“Camera Wedges are cut from 1x Clear Pine lumber and measure
1”x3/4”x5”. We offer them by the piece, in a Box of 50 Wedges
and in a Box containing 100.
CRIBBING
Cibbing is cut from Premium 2x4 lumber and is available in two lengths.
The Short Cribbing is 2x4x11-¾” and the Long Cribbing is 2x4x18-¼”.
STAIR (STEP) BLOCKS
Two types of Stair Blocks are available. One set is made of Premium 2x4
lumber and the other made from ¾” Birch Plywood.